Alcohol Check DUI Blowing Special Alcohol Concentration Detector High Precision

Description

Alcohol To Check DUI Blowing Special Alcohol Concentration Detector To Measure DUI High Precision Measuring Instrument
Features:
[Non-contact alcohol detector] This alcohol detector can measure the alcohol concentration in exhaled breath with just one blow, which is healthier and safer than direct inhalation.
【Large LCD Display】The large LCD display allows you to see the test results at a glances, and you can easily see the displayed values ​​even in the dark night. Equipped with indicator lights, the test results are clear at a . A red light indicates intoxication, and the detector beeps if the reading exceeds the alarm density. Green light means no drinking, yellow light means drinking, be careful.
[Adopting a high-sensitivity detection sensor] An ultra-high-sensitivity semiconductor sensor is installed. It takes 5 seconds to detect the alcohol level and see if you can drive safely. The measured value is displayed on the LCD screen and digitally. It has a simple structure so it can be easily measured.
[USB charging] The alcohol detector has a built-in 150mAH battery, which can be used about 500 times in one hour. Comes with a USB charging cable, which can be directly connected to USB adapters, mobile phone batteries, car chargers, PCs, etc. for fast charging.
Because it is super small, it is about 10 cm long, and it comes with its own storage bag, which is convenient to carry anytime, anywhere. It is very suitable as a Father's Day gift for the elderly, friends, colleagues and boyfriends, not just for yourself. Very active in various places such as pre-drive, drinking parties/party, excessive drinking prevention, pre-work inspections (taxi, rail, bus companies, etc.).
Product Description:
Sensor type: Semiconductor type sensor
Display: LCD display (black and white)
Shell material: ABS plastic
Test range: 0.00-0.19%BAC(0-1.9g/l)
Measurement unit: mg/l (BrAC) mg/ml (BAC)
Measurement mode: , automatic detection
Measurement time: 20 seconds
Power supply mode: built-in rechargeable polymer lithium battery
Using battery: 3.7V 140MAH can be tested 150 times continuously
Power adapter requirements: DC5V 1A
Working temperature: 0-45℃
Warm-up time: 10 seconds
Blowing time: within 10 seconds, more than 4 seconds required
Response time: less than 5 seconds
Working current: 250MA (max)
Standby current: less than 20UA